G9Sp Configurator Functions - Omron G9SP-N20S Operation Manuals

Overview
5-1-2

G9SP Configurator Functions

Precautions for Correct Use
• The G9SP Configurator cannot be used if it is connected to an RS-232C
Option Board or Ethernet Option Board. Always connect it directly to the
USB port.
• Do not turn OFF the power supply to the G9SP-series Controller or discon-
nect the USB cable while online. Before removing the USB cable, place the
application offline.
• The computer cannot be placed on standby while it is connected to the
G9SP-seried Controller with a USB cable.
The G9SP Configurator can be used for the following purposes.
Setup and Programming
G9SP Configurator
Hardware Settings
The hardware configuration and Safety I/O terminals of the G9SP-series
Controller are set here.
System Settings
The cycle time and other software functions of the G9SP-series
Controller are set here.
Programming
Safety-certified function blocks
are used to program the
G9SP-series Controller.
Offline Simulation
The program can be debugged on the computer.
Search Functionality
You can search for I/O tags and error locations in the program.
Force-set/reset
The actual I/O of the G9SP-series Controller can be turned ON and OFF.
Online Monitoring
The program execution status, error log, and other items in the G9SP-series
Controller can be monitored.
Displaying and Other Functions
Printing Reports
Settings can be checked and printed.
Access Rights
Protections can be set using passwords for changes to settings in the G9SP-series
Controller and to accessing and editing project files on the computer.
Section 5-1
Unit Configuration
Safety Output
Terminal Settings
Logic Editor
User-defined Function Blocks
Debugging and Maintenance
69