Resetting The G9Sp-Series Controller - Omron G9SP-N20S Operation Manuals

Resetting the G9SP-series Controller

8-4

Resetting the G9SP-series Controller

Reset Types
Reset type
Emulate cycling power Settings before the
reset are retained.
Return to the out-of- Initialization (Default)
box configuration, and
then emulate cycling
power. (Initialize all
data.)
Reset Type and Controller Status
Procedure for Resetting
1,2,3...
136
The G9SP Configurator can reset the G9SP-series Controller in the following
two ways. A password is required to execute the reset.
Configuration data
Same as before reset. Log before the reset is
Flashing red and
green. (Waiting for
configuration.)
The configuration data includes hardware settings, such as I/O terminal set-
tings as well as the program and system settings.
The G9SP-series Controller stores this data in nonvolatile memory. Some
information, however, cannot be changed once it is set without resetting the
G9SP-series Controller. Select Return to the out-of-box configuration, and
then emulate cycling power to return the information to the default parameter
settings.
Depending on the reset type and the G9SP-series Controller status, resetting
might not be possible. Refer to 9-3 Configuration Lock and Automatic Opera-
tion for information on locking the configuration.
Reset type
Emulate cycling power
Return to the out-of-box
configuration, and then
emulate cycling power
1. Go online and select Reset from the Communication Menu.
2. In the Device Reset Window, input the reset type and the Device Pass-
word.
3. If a display appears saying that the reset has been completed, the G9SP-
series Controller has been reset.
MS indicator Error log/operation
retained.
Log before the reset is
retained.
G9SP-series Controller status
Configuration lock -
LOCK indicator lit yellow.
Able to reset
Unable to reset
Section 8-4
Unit Conduction
log Time
Values before reset
are retained.
Values before reset
are retained.
Configuration lock -
LOCK indicator flashing
yellow or not lit.
Able to reset
Able to reset