Overview Of Troubleshooting - Omron NX Series Hardware User Manual

6 Troubleshooting
6-1

Overview of Troubleshooting

You manage all of the errors that occur on the NJ/NX-series Controller as events.
This allows you to see what errors have occurred and find corrections for them with the same methods
for the entire range of errors that is managed (i.e., CPU Unit, X Bus Units, NX Units, NX-series Slave
Terminals, EtherCAT slaves
*1. Only Sysmac devices are supported.
Checking
Network Status
Network Configurator
Troubleshooting
function
Sysmac Studio
Error management range for
NJ/NX-series Controller
You can use the troubleshooting functions of the Sysmac Studio or the Troubleshooter on an HMI to
quickly check for errors that have occurred and find corrections for them.
Refer to the NJ/NX-series Troubleshooting Manual (Cat. No. W503) for error types and details, specific
corrections when errors occur, and troubleshooting information on the entire NJ/NX-series Controllers.
6-2
*1
, and CJ-series Units).
Host computer
NX-series NJ/NX-series
X Bus Units CPU Unit
PORT2
EtherCAT
slaves
EtherNet/IP
Built-in
EtherNet/IP
CJ-series Units and
port
NX Units
POWER
Built-in EtherCAT port
EtherCAT
NX-series NX502 CPU Unit Hardware User's Manual (W629)
HMI
Troubleshooter Troubleshooter