Monitoring Devices
10-1-3 Error Log
150
Past and present G9SP-series Controller errors can be checked. Up to ten
errors are stored in the nonvolatile memory in the G9SP-series Controller.
They are still retained even when the power is turned OFF and back ON.
When more than 10 records are stored, the oldest records are deleted.
Displays the unit ON time when the error occurred.
Clears all errors from the error log.
The error log is not updated when the Error Log List Tab
Page is displayed. Always click the Update Button.
Precautions for Correct Use
Details on the error can be displayed by clicking the Help Button. This infor-
mation is also provided in SECTION 13 Troubleshooting of this manual. Refer
to one of these and remove the cause of the error.
Additional Information
• The Unit Conduction Time is the total time that the G9SP-series Controller
has been operating normally with the power ON. The time is saved every
six minutes.
• The error log list is not updated by moving between tabs (i.e., opening
another tab page and then again opening the Error Log List Tab Page). To
update the display, you must click Update Button.
Displays the contents of the error.
Used to save the error log in a CSV-format file.
Section 10-1
Newer
Older