Transmission/Reception Data - Omron G9SP-N20S Operation Manuals

Functionality for All Option Board's
7-1-3

Transmission/Reception Data

Reception Data (Standard PLC to G9SP-series Controller)
Optional Communications Reception Data
Bit 7
+0 Bit 07
+1 Bit 15
+2 Bit 23
+3 Bit 31
106
This section describes the data that can be sent and received by the G9SP-
series Controller. There is no difference in data specifications for RS-232C
serial communications and Ethernet communications.
The format of the data component sent from a Standard PLC to the G9SP-
series Controller is shown below.
+0 Optional Communications Reception Data 4 bytes
+4 Reserved
Bit 6 Bit 5
Bit 06 Bit 05
Bit 14 Bit 13
Bit 22 Bit 21
Bit 30 Bit 29
These 32 bits of data can be used in the program of the G9SP-series Control-
ler. The data is displayed as Optional Communications Reception Data in the
I/O Tag List.
Bit 4 Bit 3
Bit 04 Bit 03
Bit 12 Bit 11
Bit 20 Bit 19
Bit 28 Bit 27
Data received by the
G9SP-series Controller
Section 7-1
2 bytes
Bit 2 Bit 1
Bit 02 Bit 01
Bit 10 Bit 09
Bit 18 Bit 17
Bit 26 Bit 25
Bit 0
Bit 00
Bit 08
Bit 16
Bit 24