General Specifications; I/O Specifications - Omron G9SP-N20S Operation Manuals

G9SP-series Controllers
2-1-3

General Specifications

2-1-4

I/O Specifications

I/O Capacities
Item
Safety Inputs 10 points
Safety Outputs 4 points
Test Outputs 4 points
Standard Outputs 4 points
Safety Input Specifications
Item
Power supply voltage (V1, V2)
*1
Current consumption
Insulation class
Overvoltage category
Noise immunity
Vibration resistance
Shock resistance
Mounting
Ambient operating temperature
Ambient operating humidity
Ambient storage temperature
Atmosphere
Operating altitude
Pollution degree
Degree of protection
Terminal screws
*1 The current consumption of external devices is not included.
G9SP-N10S
10 points
16 points
6 points
-
Item
Input type
Input current
ON voltage
OFF voltage
OFF current
Precautions for Correct Use
Safety devices with semiconductor outputs, such as safety light curtains,
sometimes provide a pulse output that is used to detect wiring errors.
Observe the following when connecting a safety device with a semiconductor
output to a Safety Input terminal on the G9SP-series Controller.
• OFF pulse width when semiconductor output is ON: 700 µs max.
24 VDC (20.4 to 26.4 VDC −15%+10%)
400 mA (V1: 300 mA, V2: 100 mA) (N10S)
500 mA (V1: 300 mA, V2: 200 mA) (N10D)
500 mA (V1: 400 mA, V2: 100 mA) (N20S)
Class III (SELV)
II
Compliant with IEC 61131-2
5 to 8.4 Hz: 3.5 mm, 8.4 to 150 Hz: 9.8 m/s
2
147 m/s : 11ms
DIN Track (IEC 60715 TH35-7.5 / TH35-15) or
M4 screws
0 to 55°C
10% to 90% (with no condensation)
−20 to 75°C
No corrosive gas
2,000 m max.
Pollution degree 2
IP20 except terminal blocks
M3 self-rising screws
G9SP-N10D
Specification
Sinking inputs (PNP compatible)
6 mA
11 VDC min. (between inputs and G1)
5 VDC max. (between inputs and G1)
1 mA max.
Section 2-1
Specification
G9SP-N20S
20 points
8 points
6 points
-
2
17