Toshiba e-STUDIO2006 Service Manual page 572

05/08 Mode Element Sub element
08 Setting Printer Paper
mode feeding
08 Setting Printer Laser
mode
08 Setting Printer Laser
mode
08 Setting Printer Laser
mode
08 Setting Printer Paper
mode feeding
08 Setting Printer Paper
mode feeding
08 Setting Printer Paper
mode feeding
08 Setting Printer Paper
mode feeding
e-STUDIO2006/2306/2506/2007/2307/2507
SELF-DIAGNOSIS CODE (03/04/05/08 CODE)
Sub-
Item Subitem Code
code
4011 -
4012 -
4013 -
4015 -
Automatic change of When a 4016 0
paper source drawer is
specified
Automatic change of When a 4016 1
paper source drawer is
specified
Feeding retry Upper 4020 0
number setting drawer (1st
drawer)
Feeding retry Upper 4020 1
number setting drawer (1st
drawer)
Default Acceptable
Details
value value
Automatic change of 1 0-1
paper source (PPC)
Pre-running rotation of 0 0-2
polygonal motor
Polygonal motor 0 0-1
rotational status
switching at the Auto
Clear Mode
Polygonal motor stop 3 0-6
period
PPC 0 0-1
PRT 0 0-1
Plain paper 5 0-5
Other paper 5 0-5
14-1-52
SRAM Contents
SYS Sets whether the drawer is changed automatically if the
paper runs out in the selected drawer and the paper of the
same size is in other drawer.
0: OFF
1: ON
SYS Sets whether or not switching the polygonal motor from the
standby rotation to the normal rotation when the original is
set on the RADF or the original cover is opened.
0: Enabled (RADF / Original cover)
1: Disabled
2: Enabled (RADF only)
SYS Sets whether or not switching the polygonal motor from the
normal rotation to the standby rotation at the Auto Clear
Mode.
0: Valid
1: Invalid
SYS Switches the polygonal motor to the standby rotation when
a certain period of time has passed from the prerunning.
At this code, the period to switch the status to the standby
rotation is set.
0: 15sec, 1: 20sec, 2: 25sec, 3: 30sec, 4: 35sec, 5:
40sec, 6: 45sec
SYS Sets whether the automatic change of paper source is
performed or not if the drawer and bypass tray is specified
as the paper source and the paper in it runs out when
printing.
0: Does not change the paper source automatically
1: Changes the paper source automatically
SYS Sets whether the automatic change of paper source is
performed or not if the drawer and bypass tray is specified
as the paper source and the paper in it runs out when
printing.
0: Does not change the paper source automatically
1: Changes the paper source automatically
M Sets the number of times feeding retry occurs from the
Upper drawer (1st drawer).
0: 0 times, 1: 1 time, 2: 2 times, 3: 3 times, 4: 4 times, 5: 5
times
M Sets the number of times feeding retry occurs from the
Upper drawer (1st drawer).
0: 0 times, 1: 1 time, 2: 2 times, 3: 3 times, 4: 4 times, 5: 5
times
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
20L/ 20H/
Proce
23L/ 23H/
dure
25L 25H
Y Y
1 Y Y
1 Y Y
1 Y Y
4 Y Y
4 Y Y
4 Y Y
4 Y Y