Center Heater Lamp (Lamp1) - Toshiba e-STUDIO2006 Service Manual

4.8.3

Center heater lamp (LAMP1)

(1) Take off the fuser unit cover/fuser unit guide
 P. 4-78 "4.8.2 Fuser unit cover/Fuser unit
guide"
(2) Disconnect 2 Faston terminals [1].
Notes:
Do not remove the Faston terminal by force,
but pull it out while pressing its lock.
(3) Remove 2 screws.
Front side: M3x5
Rear side: M3x8
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
DISASSEMBLY AND REPLACEMENT
[1]
M3x5
M3x5
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
4 - 80
M3x8
[1]
Fig. 4-211
Fig. 4-212
M3x8
Fig. 4-213