Paper Exit Motor (M6) - Toshiba e-STUDIO2006 Service Manual

4.10.4

Paper exit motor (M6)

(1) Remove 1 screw and remove the connector
cover [1].
(2) Disconnect the Faston terminal [2].
(3) Remove 3 screws and remove the rear cover
[3].
Notes:
When attaching the rear cover, be sure to
insert the two hooks on its right side before
tightening the screws.
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
DISASSEMBLY AND REPLACEMENT
[3]
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
4 - 118
[1]
Fig. 4-314
[2]
Fig. 4-315
M4
M3
Fig. 4-316