Toshiba e-STUDIO2006 Service Manual page 219

(4) Take off the actuator [3] and spring [4].
Notes:
When installing the actuator, hook the spring
as shown in the figure.
(5) Release 3 latches and take off the exit
sensor [5].
(6) Disconnect the connector.
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
[3]
Fig. 4-261
Fig. 4-262
Fig. 4-263
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
4 - 99
[4]
[5]
DISASSEMBLY AND REPLACEMENT
4