Toshiba e-STUDIO2006 Service Manual page 187

(4) Release 2 latches and take off the holder [3].
(5) Insert a fine screwdriver into the depression
of the oil seal to take it out.
(6) Push in a new oil seal parallel to the frame or
bushing Refer to Fig.4-171.
(7) Apply the grease (Alvania No.2; amount of 2
rice grains) on entire surface of the oil seal
evenly.
Notes:
Wipe off the excessive grease.
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-176
Fig. 4-177
Inside
Grease
Fig. 4-178
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
4 - 67
[3]
Outside
Oil seal
DISASSEMBLY AND REPLACEMENT
4