Exit Sensor (S3) - Toshiba e-STUDIO2006 Service Manual

3. When installing the fuser unit, hold the
positions shown in the figure.
4.9.2

Exit sensor (S3)

(1) Take off the fuser unit.
 P. 4-97 "4.9.1 Fuser unit"
(2) Open the fuser unit guide [1].
(3) Remove 1 screw and take off the guide [2].
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
DISASSEMBLY AND REPLACEMENT
[1]
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
4 - 98
Fig. 4-258
Fig. 4-259
[2]
Fig. 4-260