Toshiba e-STUDIO2006 Service Manual page 289

[ 2 ] Confirmation of errors
If the data have not been properly restored, the following messages will appear on the LCD screen. In
this case, turn the power OFF, and then check the items below. After confirming and solving the
problem, restore the data again from the beginning.
Display content
USB DEVICE NOT DETECTED
INVALID BACKUP FILE
INVALID MFP SERIAL NUMBER The entered serial number is
NO BACKUP FILE EXISTS
BACKUP FILE CORRUPTED
INVALID PASSWORD
RESTORE FAILED RESTART
THE MFP
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
Error content
A USB device has not been
connected.
No backup file is stored in the
USB device.
not the same as that of the
backup data.
The backup data (product code)
in the USB device are not the
same as the model.
The backup file has been
damaged.
The entered password differs
from that for the backup.
Restoring the data has failed.
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
5 - 33
Measures
Reconnect the USB device.
Check the USB device and
perform the backup procedure
again.
Check if the serial number is
correct.
Check the backup data
(product code) and the model
name.
Perform the backup procedure
again.
Check if the password is
correct.
Perform the restore procedure
again.
SELF-DIAGNOSIS MODES
5