4.13.2
Paper feed unit (PFU)
(1)
Turn off the main power switch and unplug
the power cable from the outlet.
(2)
Remove the drawer.
(3)
Take off the rear cover.
P. 4-6 "4.1.10 Rear cover <23LA/23LM/
28LM/23HA/28HA>"
(4)
Remove 3 screws and remove the PFU gear
unit [1].
(5)
Release 2 clamps [2] and disconnect 1
connector [4] from the MAIN board [3].
(6)
Disconnect 1 connector [5].
(7)
Remove 1 screw and the ground wire [6].
(8)
Remove the upper drawer and the lower
drawer (PFU drawer).
(9)
Remove 1 screw and remove 1 front left
fixing bracket [7].
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-361
[4]
[2]
[6]
Fig. 4-362
Fig. 4-363
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
4 - 135
[1]
[3]
[5]
[7]
DISASSEMBLY AND REPLACEMENT
4