Opening The Batch Process Manager; Creating A Job List - HEIDENHAIN TNC 640 User Manual

Batch Process Manager | Batch Process Manager (option 154)
Soft key Function
Insert a new Pallet, Fixture or Program
after the cursor position
Delete line or block
Switch active windows
Move line
Reset status
Select possible entries from a pop-up
window
Select line
Cancel marking

Opening the Batch Process Manager

You can open the Batch Process Manager in the following way:
Press the Batch Process Manager key
The control opens the Batch Process Manager.

Creating a job list

There are two ways to create a job list:
In the pallet management
Further information:
The control opens the pallet table (.p) in the Batch Process
Manager as a job list.
Directly in the Batch Process Manager
HEIDENHAIN | TNC 640 | ISO Programming User's Manual | 10/2017
"Pallet Management", page 601
15
619