Printer - HEIDENHAIN TNC 640 User Manual

2

Printer

The Printer function in the HeROS menu enables you to add and
manage printers.
Displaying the printer settings
Proceed as follows to access the printer settings:
Open the task bar at the bottom edge of the screen
Further information:
Press the green HEIDENHAIN button to open the JH menu
Select the Settings menu item
Select the Printer menu item
The control opens the Heros Printer Manager pop-up window.
The name of the printer is displayed in the input field.
Soft key
CREATE
CHANGE
COPY
DELETE
UP
DOWN
STATUS
PRINT
TEST PAGE
For each printer, the following attributes can be set:
Setting
Name of the printer
Connection
Timeout
Standard printer
110
"Window manager", page 103
Meaning
Creates the printer named in the input field
Modifies the properties of the selected printer
Creates the printer named in the input field with the attributes of the selected print-
er
This can be useful if printing both portrait and landscape formats on the same print-
er
Deletes the selected printer
Selects the desired printer
Displays status information of the selected printer
Prints a test page on the selected printer
Meaning
The printer name can be changed here.
Here, you can select the connection type
USB: The USB connection can be assigned here. The name is displayed
automatically.
Network: Enter the network name or the IP address of the target printer here. In
addition, specify the port of the network printer here (default: 9100)
Printer not connected
Defines the delay to printing after the last change has been made to the file to be
printed in PRINTER:. This can be useful if the file to be printed is populated with
data by using FN functions, e.g. during probing.
Select to define the standard printer in case several printers are available. Is defined
automatically when creating the first printer.
Introduction | Window manager
HEIDENHAIN | TNC 640 | ISO Programming User's Manual | 10/2017