Mod Function; Selecting Mod Functions; Changing The Settings; Exiting Mod Functions - HEIDENHAIN TNC 640 User Manual

20

20.1 MOD function

The MOD functions provide additional input possibilities and
displays. In addition, you can enter code numbers to enable access
to protected areas.

Selecting MOD functions

Open the pop-up window with the MOD functions:
Press the MOD key
The control opens a pop-up window displaying
the available MOD functions.

Changing the settings

As well as with the mouse, navigation with the keyboard is also
possible in the MOD functions:
Switch from the input area in the right window to the MOD
function selections in the left window with the tab key
Select MOD function
Switch to the input field with the tab key or ENT key
Enter value according to function and confirm with OK or make
selection and confirm withApply
If there are multiple possible settings available, then you
can show the selection box by pressing the GOTO key.
Select the desired setting with the ENT key. If you do
not wish to change the setting, close the window with
the END key.

Exiting MOD functions

Exit the MOD functions: Press the END soft key or the END key
792
MOD Functions | MOD function
HEIDENHAIN | TNC 640 | ISO Programming User's Manual | 10/2017