Introduction | Accessories: HEIDENHAIN 3-D touch probes and electronic handwheels
HR electronic handwheels
Electronic handwheels facilitate moving the axis slides precisely
by hand. A wide range of traverses per handwheel revolution is
available. Apart from the HR 130 and HR 150 integral handwheels,
HEIDENHAIN also offers the HR 510, HR 520 and HR 550FS
portable handwheels.
Further information:
"Traverse with electronic handwheels",
page 671
Several electronic handwheels can also be connected
simultaneously and used alternatively on controls with
the (HSCI: HEIDENHAIN Serial Controller Interface)
serial interface for control components.
Configuration is performed via the machine tool builder.
HEIDENHAIN | TNC 640 | ISO Programming User's Manual | 10/2017
2
125