HEIDENHAIN TNC 640 User Manual page 335

Data Transfer from CAD Files | CAD import (option 42)
Selecting a preset on the intersection of two elements
Select the mode for specifying the preset
Click the first element (straight line, circle or
circular arc) with the left mouse button
The element is color-highlighted.
Click the second element (straight line, circle or
circular arc) with the left mouse button
The control sets the preset symbol on the
intersection.
You can adjust the orientation of the coordinate
system, if required.
Further information:
of the coordinate system", page 335
Operating notes:
If there are several possible intersections, the control
selects the intersection nearest the mouse-click on
the second element.
If two elements do not intersect directly, the control
automatically calculates the intersection of their
extensions.
If the control cannot calculate an intersection, it
deselects the previously selected element.
If a preset is set, the color of the
You can delete a preset by pressing the
Adjusting the orientation of the coordinate system
The position of the coordinate system is defined by the orientation
of the axes.
The preset has already been set
Left-click an element that is in the positive X
direction
The control aligns the X axis and displays it in red
in the list view.
Left-click an element that is approximately in the
positive Y direction
The control aligns the Y and Z axes and displays
them in green and blue in the list view.
Element Information
In the Element Information window, the control shows how far the
preset you have chosen is located from the drawing datum, and
how this reference system is oriented with respect to the drawing.
HEIDENHAIN | TNC 640 | ISO Programming User's Manual | 10/2017
"Adjusting the orientation
"Setting a preset" icon changes.
icon.
8
335