Tools | Tool compensation
Tool radius compensation
The block for programming a tool movement contains:
G41 or G42 for radius compensation
G40, if there is no radius compensation
The radius compensation is effective as soon as a tool is called and
traversed with a straight-line block in the working plane with G41 or
G42.
The control automatically cancels radius compensation
in the following cases:
Straight-line block with G40
DEP function for departing from the contour
Selection a new program via PGM MGT
For radius compensation, the control takes the delta values from
both the T block and the tool table into account:
Compensation value = R + DR
R:
Tool radius R from G99 block or tool table
DR
Oversize for radius DR in the T block
:
CALLT block
DR
Oversize for radius DR in the tool table
:
TAB
Contouring without radius compensation: G40
The tool center moves in the working plane along the programmed
path, or to the programmed coordinates.
Applications: Drilling and boring, pre-positioning
HEIDENHAIN | TNC 640 | ISO Programming User's Manual | 10/2017
+ DR
with
CALLT block
TAB
6
263