Setting Up The Server To Recognize The Logical Units - Fujitsu ETERNUS DX Configuration Manual

Chapter 4 Operations When Using Brocade Fibre Channel Cards
4.4

Setting Up the Server to Recognize the Logical Units

4.4 Setting Up the Server to Recognize the Logical Units
Set the server to recognize the ETERNUS DX/AF storage systems' logical units.
Execute the following commands to check the path of the ETERNUS DX/AF to be connected.
1
Execute the following command to confirm that the server can access the logical units.
# cfgadm -al
# cfgadm -al
Ap_Id
c2
c2::500000e0d0400006
c3
c3::500000e0d0400086
Underlined portion indicates that the ETERNUS DX/AF CA (WWN:500000e0d0400086) are connected to
the Fibre Channel card port with controller number "c3".
2
Use the following command to confirm that the storage system and all the logical units have been cor-
rectly recognized.
# format
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c0t0d0 <SUN146G cyl 14087 alt 2 hd 24 sec 848>
/pci@780/pci@0/pci@9/scsi@0/sd@0,0
1. c2t500000E0D0400006d0 <FUJITSU-ETERNUS_DXL-0000 cyl 379 alt 2 hd 64 sec 256>
/pci@7c0/pci@0/pci@8/bfa@0/fp@0,0/ssd@w500000e0d0400006,0
2. c2t500000E0D0400006d1 <FUJITSU-ETERNUS_DXL-0000 cyl 379 alt 2 hd 64 sec 256>
/pci@7c0/pci@0/pci@8/bfa@0/fp@0,0/ssd@w500000e0d0400006,1
3. c3t500000E0D0400086d0 <FUJITSU-ETERNUS_DXL-0000 cyl 379 alt 2 hd 64 sec 256>
/pci@7c0/pci@0/pci@8/bfa@0,1/fp@0,0/ssd@w500000e0d0400086,0
4. c3t500000E0D0400086d1 <FUJITSU-ETERNUS_DXL-0000 cyl 379 alt 2 hd 64 sec 256>
/pci@7c0/pci@0/pci@8/bfa@0,1/fp@0,0/ssd@w500000e0d0400086,1
The underlined portion indicates that the ETERNUS DX/AF target ID=500000E0D0400086, lun=0 and 1
are connected to physical path /pci@7c0/pci@0/pci@8/bfa@0,1 and c3t500000E0D0400086d0 and
c3t500000E0D0400086d1 are assigned to each of these LUNs.
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris
Type Receptacle
fc-fabric connected
disk connected
fc-fabric connected
disk connected
81
Copyright 2017 FUJITSU LIMITED
Occupant Condition
configured unknown
configured unknown
configured unknown
configured unknown
P3AM-6312-18ENZ0