Fujitsu ETERNUS DX Configuration Manual page 76

Chapter 4 Operations When Using Brocade Fibre Channel Cards
4.3 Setting Up the Server
3
Enter the slot number of the Fibre Channel card installed in the server in the "Physical slot name" field
of the "WWN instance management table for the server".
Use the "/usr/platform/`uname -i`/sbin/prtdiag -v" command to check the installed Fibre Channel card
slot number.
Example: Excerpt from "/usr/platform/SUNW,SPARC-Enterprise-T5220/sbin/prtdiag -v" output
# /usr/platform/SUNW,SPARC-Enterprise-T2000/sbin/prtdiag -v
========================= IO Configuration ======================================
Location
---------------------------------------------------------------------------------
IOBD/PCIE1
IOBD/PCIE2
Physical slot
name
PCIE1
PCIE2
4
Check the WWN of each Fibre Channel card.
(1)
Use the following command to check the display order of the Fibre Channel card physical path
names.
# prtpicl -v -c scsi-fcp | grep devfs-path
Example:
# prtpicl -v -c scsi-fcp | grep devfs-path
:devfs-path
:devfs-path
(2)
Use the following command to check the WWN of the Fibre Channel card that corresponds to the
physical path name. The result is displayed in the same order as shown in
# prtpicl -v -c scsi-fcp | grep port-wwn
Example:
# prtpicl -v -c scsi-fcp | grep port-wwn
:bfa0-port-wwn
:bfa1-port-wwn
If the WWN does not appear in the procedure above, execute the "bcu port --list" command.
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris
Type Slot Path
PCIE 1 /pci@7c0/pci@0/pci@8/bfa@0
PCIE 2 /pci@7c0/pci@0/pci@8/bfa@0,1
Controller
WWN
number
/pci@7c0/pci@0/pci@8/bfa@0
/pci@7c0/pci@0/pci@8/bfa@0,1
76
Copyright 2017 FUJITSU LIMITED
Name
bfa-pciex1657,13 Brocade-8+
bfa-pciex1657,13 Brocade-8+
Instance
Physical path name
name
bfa0 /pci@7c0/pci@0/pci@8/bfa@0
bfa1 /pci@7c0/pci@0/pci@8/bfa@0,1
10:00:00:05:1e:e7:45:7b
10:00:00:05:1e:e7:45:7c
Model
Step (1).
P3AM-6312-18ENZ0