Chapter 8 Setting Up The Server To Recognize The Logical Units - Fujitsu ETERNUS DX Configuration Manual

Chapter 8
Setting Up the Server to Recognize the Logical
Units
Refer to each "FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for Ora-
cle Solaris" for detailed setting procedures.
"FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris
•
Driver Settings for Fujitsu Fibre Channel Cards"
"FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris
•
Driver Settings for Non-Fujitsu Fibre Channel Cards"
Skip this chapter if using the ETERNUS Multipath Driver "grmpdautoconf" command, since logical units are
automatically recognized.
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris
37
Copyright 2015 FUJITSU LIMITED
P3AM-3702-16ENZ0