Creating A Wwn Instance Management Table For The Server - Fujitsu ETERNUS DX Configuration Manual

Chapter 4 Operations When Using Brocade Fibre Channel Cards
4.3 Setting Up the Server
4.3.1

Creating a WWN Instance Management Table for the Server

Create a "WWN instance management table for the server" with information regarding the Fibre Channel
card.
Determine the following information for each Fibre Channel card installed in the server and enter it into a
copy of the "WWN instance management table for the server". (found in
Table Templates" (page
• Physical slot name
WWN
•
Number of the target controller connected to the Fibre Channel card
•
Instance name
•
Physical path name
•
WWN Instance Management Table for the Server
Physical slot name
1
Check the instance names.
"bfa + instance number" is the format used to represent Fibre Channel card instance names.
The instance number that corresponds to the physical path in which the Fibre Channel card is installed
is stored in the "/etc/path_to_inst" file at Fibre Channel card driver installation. Extract the necessary
lines using the "grep" command.
# grep "bfa" /etc/path_to_inst
Example:
# grep "bfa" /etc/path_to_inst
"/pci@7c0/pci@0/pci@8/bfa@0"
"/pci@7c0/pci@0/pci@8/bfa@0,1" 1 "bfa"
The underlined portion "/pci@7c0/pci@0/pci@8/bfa@0,1" indicates the physical path name, and "1" in-
dicates the instance number.
2
Enter the results in "Instance name" and "Physical path name" columns of the "WWN instance manage-
ment table for the server".
Example:
Physical slot
name
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris
82)).
WWN Controller number
WWN
Copyright 2017 FUJITSU LIMITED
"Appendix A Various Management
Instance name
0 "bfa"
Controller num-
Instance name
ber
bfa0
bfa1
75
Physical path name
Physical path name
/pci@7c0/pci@0/pci@8/bfa@0
/pci@7c0/pci@0/pci@8/bfa@0,1
P3AM-6312-18ENZ0