Fujitsu ETERNUS DX Configuration Manual page 64

Chapter 3 Setup Procedure for QLogic Fibre Channel Cards
3.4 Setting Up the Server to Recognize the Logical Units
Example:
#
# Copyright 2006 Sun Microsystems, Inc.
# Use is subject to license terms.
#
#ident "@(#)sd.conf 1.10 06/02/08 SMI"
name="sd" class="scsi" class_prop="atapi"
target=0 lun=0;
name="sd" class="scsi" class_prop="atapi"
target=1 lun=0;
name="sd" class="scsi" class_prop="atapi"
target=2 lun=0;
name="sd" class="scsi" class_prop="atapi"
target=3 lun=0;
name="sd" class="scsi"
target=4 lun=0;
name="sd" class="scsi"
target=15 lun=0;
#
# Enable Target 7 for the mpt SCSI/SAS/SATA driver.
# traditionally been reserved for legacy SCSI HBAs, but SAS controllers
# supported by the mpt driver do not use target 7 for that purpose.
# Enabling Target 7 allows the use of 8 disks on those controllers.
#
name="sd" parent="mpt"
target=7 lun=0;
name="sd" parent="qla2300" target=2048;
Check the underlined portion.
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris
:
:
Copyright 2017 FUJITSU LIMITED
All rights reserved.
Target 7 has @
64
P3AM-6312-18ENZ0