Fujitsu ETERNUS DX Configuration Manual page 3

Fibre channel for oracle solaris driver settings for non-fujitsu fibre channel cards
Hide thumbs Also See for ETERNUS DX:
Table of Contents

Advertisement

This manual briefly explains the operations that need to be performed by the user in order to connect an
ETERNUS DX/AF to a server running Solaris OS and using non-Fujitsu Fibre Channel cards via a Fibre Channel
interface.
This manual is used when performing the setup procedure described in "Installing Drivers and Setting Up the
Server" and "Recognizing the Logical Units" of the "Configuration Guide -Server Connection- (Fibre Channel)
for Oracle Solaris".
This manual should be used in conjunction with any other applicable user manuals, such as those for the
ETERNUS DX/AF, server, OS, Fibre Channel cards, and drivers.
Refer to "Configuration Guide -Server Connection- Notations" for the notations used in this manual such as
product trademarks and product names. For storage systems that are supported by the OS, refer to the Server
Support Matrix of the ETERNUS DX/AF.
The Contents and Structure of this Manual
This manual is composed of the following four chapters and an appendix.
"Chapter 1 Operations When Using Oracle Fibre Channel Cards" (page 6)
This chapter describes the workflow required to establish a connection between a server with Oracle Fibre
Channel cards and an ETERNUS DX/AF.
"Chapter 2 Setup Procedure for Emulex Fibre Channel Cards" (page 27)
This chapter describes the workflow required to establish a connection between a server with Emulex Fibre
Channel cards and an ETERNUS DX/AF.
"Chapter 3 Setup Procedure for QLogic Fibre Channel Cards" (page 54)
This chapter describes the workflow required to establish a connection between a server with QLogic Fibre
Channel cards and an ETERNUS DX/AF.
"Chapter 4 Operations When Using Brocade Fibre Channel Cards" (page 73)
This chapter describes the workflow required to establish a connection between a server with Brocade Fibre
Channel cards and an ETERNUS DX/AF.
An appendix contains the various management tables that are used in "Setting Up the Server".
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris
3
Copyright 2017 FUJITSU LIMITED
Preface
18th Edition
December 2017
P3AM-6312-18ENZ0

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eternus af

Table of Contents