Fujitsu ETERNUS DX Configuration Manual page 72

Chapter 3 Setup Procedure for QLogic Fibre Channel Cards
3.5 Required Driver Parameters
# Use target/lun VPD data for failover configuration support.
# 0 = disabled, 1 = enable
hba0-VPD-support=0;
hba1-VPD-support=0;
# Advance Interrupt Framework (AIF) support.
# 0 = disable AIF
# 1 = disable MSI-X
# 2 = disable MSI
# 3 = disable MSI and MSI-X
# 4 = system default
hba0-AIF-support=0;
hba1-AIF-support=0;
#####################################################################
# WARNING: Beginning of Configuration Data stored by the QLogic
# Applications. Consult documentation before editing
# any data past this text.
#####################################################################
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris
For both direct connections and switch connections,
add these settings.
For both direct connections and switch connections,
add these settings.
72
Copyright 2017 FUJITSU LIMITED
#
#
#
P3AM-6312-18ENZ0