Setting Up The Server - Fujitsu ETERNUS DX Configuration Manual

Chapter 1 Operations When Using Oracle Fibre Channel Cards
1.3

Setting Up the Server

1.3 Setting Up the Server
The server setup will vary according to how the ETERNUS DX/AF storage systems and server are to be connec-
ted. There are two possible connection topologies: direct connection and switch connection.
Edit the server's configuration file to match the chosen topology. Configuration files may also differ depend-
ing on which Fibre Channel card drivers are to be used. Check the Fibre Channel card product ID in the follow-
ing table and follow the procedure detailed in the indicated section
bre Channel Cards" (page 9)
Procedure
"1.3.1 Oracle Driver for QLogic OEM Fibre Channel
Cards" (page 9)
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris
or "1.3.2 Oracle Driver for Emulex OEM Fibre Channel Cards" (page
Supplier
Fujitsu
Oracle (Former Sun)
8
Copyright 2017 FUJITSU LIMITED
("1.3.1 Oracle Driver for QLogic OEM Fi-
13)).
Fibre Channel card product ID
SP1X7FAS2F
•
SP1X7FAR2F
•
SP1X7FAB2F
•
SP1X7FAA2F
•
SP1X5FAS2F
•
SP1X5FAR2F
•
SP1X5FAA2F
•
SE0X7F22X
•
SE0X7F21X
•
SE0X7F22F
•
• SE0X7F21F
XSPFC212A
•
• XSPFC211A
XSPFC202A
•
• XSPFC201A
X6799A
•
• X6768A
X6767A
•
• X6727A
7101682
•
7101681
•
7101674
•
7101673
•
SG-XPCIE2FC-QF8-Z
•
SG-XPCIE1FC-QF8-Z
•
SG-XPCIE2FC-QF4
•
SG-XPCIE1FC-QF4
•
SG-XPCI2FC-QF4
•
SG-XPCI1FC-QF4
•
SG-XPCI2FC-QF2-Z
•
SG-XPCI2FC-QF2
•
SG-XPCI1FC-QF2
•
• SG-XPCI1FC-QL2
P3AM-6312-18ENZ0