Programming; Programming Procedure - Mitsubishi Q64AD-GH User Manual

6 PROGRAMMING

6 PROGRAMMING
This chapter describes the programs of the A/D converter modules.
When applying any of the program examples introduced in this chapter to the actual
system, verify the applicability and confirm that no problems will occur in the system
control.

6.1 Programming Procedure

In the following procedure, create a program that will execute the analog/digital
conversion of the A/D converter module.
6 - 1
Start
A/D conversion enable
/disable setting
Do you perform
averaging processing?
YES
Set the average count.
Set the average time.
Set the move average count.
Set the time constant.
Averaging process
specification
Do you set the A/D
conversion starting time?
(Q62AD-DGH only)
YES
A/D conversion starting time setting
Do you perform input
signal error detection and
warning output (process
alarm, rate alarm)?
YES
Input signal error
detection/warning output settings
Set the process alarm upper/lower limit values.
Set the rate alarm warning detection period.
Set the rate alarm upper/lower limit values.
Set the input signal error detection setting values.
Turn ON the operating condition
setting request (Y9).
Read the digital output
values.
End
NO
NO
Initial setting
NO
MELSEC-Q
6
6 - 1