Mitsubishi Q64AD-GH User Manual page 19

2 SYSTEM CONFIGURATION
(4) Compatibility with online module change
The A/D converter module does not have the products of function versions A and B.
The products of function version C include the functions of the products of function
versions A and B.
(5) Q64AD-GH compatible software packages
Q00J/Q00/Q01CPU
Q02/Q02H/Q06H/
Q12H/Q25HCPU
Q12PH/Q25PHCPU
If installed in a MELSECNET/H remote I/O
station
(6) Q62AD-DGH compatible software packages
Q00J/Q00/Q01CPU
Q02/Q02H/Q06H/
Q12H/Q25HCPU
Q12PH/Q25PHCPU
If installed in a MELSECNET/H remote I/O
station
2 - 2
To make an online module change, use the A/D converter module of function
version C or later.
POINT
The following table indicates the compatibility of the systems using the Q64AD-
GH with the software packages.
GX Developer is required when the Q64AD-GH is used.
Single PLC system
Multiple PLC system
Single PLC system
Multiple PLC system
Single PLC system
Multiple PLC system
4 When using the pass data, use the product of Version 1.16S or later.
The following table indicates the compatibility of the systems using the Q62AD-
DGH with the software packages.
GX Developer is required when the Q62AD-DGH is used.
Single PLC system
Multiple PLC system
Single PLC system
Multiple PLC system
Single PLC system
Multiple PLC system
Software Version
GX Configurator-AD
GX Developer
Version 7 or later
Version 8 or later
Version 4 or later
Version 6 or later
Version 1.14Q or later
Version 7.10L or later
Version 6 or later
Software Version
GX Developer
GX Configurator-AD
Version 7 or later
Version 8 or later
Version 4 or later
Version 6 or later
Version 1.14Q or later
Version 7.10L or later
Version 6 or later
MELSEC-Q
2
4
2 - 2