7 ONLINE MODULE CHANGE
7 - 21
(2) Dismounting of module
(a)
After choosing [Diagnosis] - [Online module change] on GX Developer to
enter the "Online module change" mode, double-click the module to be
changed online to display the "Online module change" screen.
(b)
Click the "Execution" button to enable a module change.
If the following error screen appears, the user range cannot be saved.
Click the [OK] button, dismount the module as-is, and perform the operation
in Section (2)(c) and later.
MELSEC-Q
7 - 21