Mitsubishi Q64AD-GH User Manual page 74

4 SETUP AND PROCEDURES BEFORE OPERATION
4.2 Setup and Procedures before Operation
4
4 - 2
Start
Module mounting
Mount the A/D converter module in the specified
slot.
Wiring
Wire external devices to the A/D converter module.
Intelligent function module switch settings
Perform settings using GX Developer
(see Section 4.5).
Use user range settings?
Use user range settings
Offset/gain setting
If user range settings are used, perform the
offset and gain settings (see Section 4.6).
Use the utility package?
YES
Initial setting and automatic refresh setting
The program can be simplified if the utility
package is used for setting (see Chapter 5).
Programming and debugging
Create and check the sequence program.
Use industrial shipment
settings
NO
MELSEC-Q
4 - 2