Mitsubishi Q64AD-GH User Manual page 95

5 UTILITY PACKAGE (GX Configurator-AD)
5 - 6
(2) Data to be created with the utility package
The data and files shown below that are created with the utility package are also
processed using GX Developer operation. Figure 5.1 shows which operation
processes which data or file.
<Intelligent function module parameters>
(a) This data is created with the automatic refresh setting, and stored in the
intelligent function module parameter file of the project to be created using
GX Developer.
Project
Program
Parameter
(b) Steps 1) to 3) shown in Figure 5.1 are performed using the following
operations.
1) Operating from GX Developer.
[Project]
2) Operating from the utility parameter setting module selection screen.
[Intelligent function module parameter]
parameter]
3) Operating from GX Developer.
[Online]
module parameters"
Or, operate from the utility parameter setting module selection screen.
[Online]
PLC Parameter
Network Parameter
Intelligent Function Module Parameter
[Open existing project] / [Save project] / [Save project as]
[Read from PLC] / [Write to PLC]
[Read from PLC] / [Write to PLC]
MELSEC-Q
[Open parameter] / [Save
"Intelligent function
5 - 6