Configuring Layer 4 Redirection In A Service Or User Profile On The Aaa Server; Verifying Isg Traffic Redirection - Cisco 10000 Series Configuration Manual

Chapter 4 Redirecting Subscriber Traffic Using Intelligent Service Gateway Layer 4 Redirect
You may want to configure a method of activating the service policy map; for example, control policies
can be used to activate services.

Configuring Layer 4 Redirection in a Service or User Profile on the AAA Server

The Layer 4 Redirect feature can be configured as a Cisco vendor-specific attribute (VSA) in a user or
service profile on an authentication, authorization, and accounting (AAA) server. This attribute can
appear more than one time in a profile to define different types of redirections for a session and can be
used in both user and service profiles simultaneously.
SUMMARY STEP
1.
DETAILED STEP
Command or Action
Step 1
Add the Layer 4 Redirect VSA to the user profile or
subscriber profile on the AAA server.
Example:
Cisco-AVPair = "ip:l4redirect=redirect to
{group server-group-name | ip ip-address [port
port-number]} [duration seconds] [frequency
seconds]"
If you configure ISG Layer 4 redirection in a service profile, you may want to configure a method of
activating the service profile; for example, control policies can be used to activate services.

Verifying ISG Traffic Redirection

Perform this task to verify the configuration and operation of ISG Layer 4 traffic redirection.
SUMMARY STEPS
1.
2.
3.
4.
OL-14660-03
Add the Layer 4 Redirect VSA to the user profile or service profile on the AAA server.
enable
show redirect translations [ip ip-address]
show redirect group [group-name]
show subscriber session [detailed] [identifier identifier | uid session-id | username name]
Cisco 10000 Series Router Access Network Control Protocol Configuration Guide
Purpose
Redirects traffic to a specified server or server group.
Configuring ISG Layer 4 Redirection
4-7