Mercedes-Benz S 350 Owner's Manual page 217

Select "Save".
COMAND stores the data if there are
fewer than four numbers assigned to
the entry you are searching for in the
selected number category.
Otherwise, you will see a prompt ask-
ing whether one of the existing num-
bers should be overwritten.
Select "Yes" or "No".
If you select "Yes", a selection list will
appear containing the four existing
numbers.
Select the number to be overwritten.
COMAND overwrites the selected
number with the new data.
Adding to a telephone number data
field
i
Each address book entry may contain up to
four data fields for private telephone numbers
and four data fields for business telephone num-
bers.
This function is not possible for entries from the
phone book on the mobile phone.
Display the details about an entry and
highlight the telephone number data
field ( page 193).
Select "Options" "Add tel. no.".
Select a number category, e.g.
"Home".
Select a telephone category, e.g.
"Landline telephone number".
Select "Save".
COMAND adds the data field to the entry if
there are fewer than four numbers as-
signed to the entry in the selected number
category. You can now enter a number into
the data field.
Proceed as described in the "To enter
data into a field" operating step in the
"Creating a new address book entry"
section ( page 190).
If four numbers are already stored for the
entry in the selected number category, a
prompt will appear asking whether one of
the data fields should be overwritten.
Select "Yes" or "No".
If you select "Yes", a selection list will
appear containing the four data fields.
Operating systems
COMAND address book
Select the field to be overwritten.
COMAND deletes the number from the
field selected. You can now enter a
number into the data field.
Proceed as described in the "To enter
data into a field" operating step in the
"Creating a new address book entry"
section ( page 190).
Calling a number stored in an entry
i
To do this, COMAND must be equipped with
a telephone*. The mobile phone must be insert-
ed into the bracket.
Display the details about an entry and
highlight the telephone number data
field ( page 193).
Press n and select "Call".
The telephone* makes the call.
i
If COMAND is not equipped with the SMS
function, the telephone* starts dialling as soon
as is pressed.
n
i
The "Call" menu item is only available if
COMAND is equipped with the SMS function.
or
195