Mercedes-Benz S 350 Owner's Manual page 184

Operating systems
COMAND navigation system* (entering a destination)
The left-hand part of the display shows
the destinations on the map. The desti-
nation marked in the list is highlighted
in the map.
To select a destination: select the de-
sired destination from the list.
The address of the destination ap-
pears.
To start route calculation: select
"Start", see also ( page 158).
Entering another destination as an in-
termediate stop
Select "Navi" "Destination"
"Stopover".
To enter: select "Other".
You can select:
"Address input"
"From memory"
"From last destinations"
"From POIs"
Select a menu item.
162
Subsequent destination input may differ,
depending on your selection:
"Address input" selected:
Entering a destination by address
( page 147).
"From memory" selected:
Entering a destination from the
destination memory ( page 158).
"From last destinations" selected:
Entering the destination from the
list of previous destinations
( page 160).
"From POIs" selected:
Entering a special destination
( page 163).
To start route calculation: select
"Start" after you have entered the des-
tination, see also ( page 158).
Changing an intermediate stop
If an intermediate stop has already been
entered, you can change this.
Select "Navi" "Destination"
"Stopover" "Change stopover".
Enter another destination as an inter-
mediate stop.
Deleting the intermediate stop
If an intermediate stop has already been
entered, you can delete it.
Select "Navi" "Destination"
"Stopover" "Delete stopover".
COMAND deletes the intermediate
stop and calculates the route to the
main destination.