Programme - Mercedes-Benz S 350 Owner's Manual

Tuning in channels by entering the fre-
quency and programme number
i
Several programmes can be transmitted on
one frequency with digital TV. You can therefore
enter a frequency and the desired programme in
this frequency.
Only one programme can be sent on a frequency
with analogue TV. The programme entry function
therefore has no effect.
Select "Video" "Video"
Show the menu system if necessary
( page 101).
Select "TV" "Channel input".
Select a number to enter the frequency
or programme.
To increase or decrease the
number: slide or turn ymz.
qmr
To select the next number: slide
omp.
To confirm an entry: press n.
i
The TV receiver always sets the frequency
and the channel that you have entered. You can
therefore also set frequencies and channels that
cannot currently be received.
Storing TV channels
There are twenty preset positions.
Storing channels manually
Calling up the preset memory display
and selecting a preset
Select "Video"
Show the menu system if necessary
"TV".
( page 101).
Select "TV"
or
Select "Presets".
Both of these will bring up a selection
list. The R dot in front of a preset po-
sition indicates that the currently se-
lected channel is stored there.
To select a preset position: slide
or turn ymz.
qmr
Storing the channel to the selected pre-
set position
"Video" "TV".
Storing using autostore
"Save station".
i
which can be received in order of their reception
quality. Any channels stored manually in the pre-
set memory will be lost.
or
Operating systems
COMAND TV*
If you have called up the channel preset
display using "Save station", press n
briefly.
If you have called up the channel preset
display using "Presets", press and hold
n until you hear an audible signal.
The channel is stored.
This function automatically stores channels
Select "Video" "Video"
Show the menu system if necessary
( page 101).
Select "Presets" "Autostore".
"TV".
103