Module Spectrum - Siemens SIMATIC S5-100U System Manual

S5-100U
14

Module Spectrum

The following section describes the standards and test values the S5-100U meets and fulfills and the
test criteria with which the S5-100U has been tested.
UL/CSA approvals
The following approvals exist for the S5-100U:
UL Recognition Mark
Underwriters Laboratories (UL) in accordance with Standard UL 508, File E 116536
CSA Certification Mark
Canadian Standard Association (CSA) in accordance with Standard C 22.2 No. 142, File LR 48323
CE marking
Our products meet the requirements and protection objectives of the following EC Directives and
comply with the harmonized European standards (EN) published in the Official Gazettes of the
European Communities with regard to programmable controllers:
• 89/336/EC "Electromagnetic Compatibility" (EMC Directive)
• 73/23/EC "Electrical Equipment Designed for Use between Certain Voltage Limits"
(Low-Voltage Directive)
The EC declarations of conformity are held at the disposal of the competent authorities at
the address below:
Siemens Aktiengesellschaft
Bereich Automatisierungstechnik
AUT E 14
Postfach 1963
D-92209 Amberg
Federal Republic of Germany
Area of Application
SIMATIC products have been designed for use in industrial environments.
With indiivdual approval, SIMATIC products can also be used in residential environments (residential,
commercial and light industry).
You must acquire the individual approval from the respective national authority or testing board.
Area of Application
Industry
Residential
Oberserving the Installation Guidelines
S5 modules meet the requirements, if installed and operated in accordance with the Installation
Guidelines (see chapter 3).
EWA 4NEB 812 6120-02b
Requirements in respect of
Emitted interference
EN 50081-2 : 1993
Individual approval
Module Spectrum
Immunity
EN 50082-2 : 1995
EN 50082-1 : 1992
14-1