Components - Fujitsu IRF-1S series User Manual

Chapter 1 - Getting Started

Components

This section provides a description of each of the major components that
comprise the imageRAID Series Storage System.
Front Bezel
The front bezel houses the Status LEDs, Drive LEDs, and alarm reset button. When
removed, the user has access to the disk drives. The front bezel can be installed or
removed without interruption to system activities.
Embedded within the front bezel is the electronic package that provides the
communication with the SES controller. The SES controller manages the signals to
the front panel through a smart interface. Power is applied to the front bezel
through the interface edge connector, where a control circuit monitors the bezel
for proper connection. When the bezel is properly installed and power is applied
to the enclosure, the bezel is immediately energized.
Refer to "Control and Monitoring" on page 18 for details on the monitoring
functions.
Drive LEDs
Status LEDs
Alar m Reset Button
Removable Front Bezel
To remove the bezel and gain access to the disk drives, use a Phillips screwdriver
to release both bezel fasteners, then grasp and remove the bezel. The fasteners
rotate one-quarter turn clockwise to lock and counter-clockwise to unlock.
3
Components