1. Manuals
  2. Brands
  3. Fujitsu Manuals
  4. Storage
  5. ETERNUS AF250 S2
  6. Basic operation manual

Fujitsu ETERNUS AF250 S2 Basic Operation Manual

Hide thumbs Also See for ETERNUS AF250 S2:
Table of Contents

Advertisement

Quick Links

Download this manual
P3AG-1842-06ENZ0
FUJITSU Storage
ETERNUS AF250 S2,
ETERNUS AF250
All-Flash Arrays
Operation Guide (Basic)
Operation management/maintenance

Advertisement

Table of Contents
loading

Related Manuals for Fujitsu ETERNUS AF250 S2

Summary of Contents for Fujitsu ETERNUS AF250 S2

  • Page 1 P3AG-1842-06ENZ0 FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Operation management/maintenance...

  • Page 2: Table Of Contents

    Displaying Status via ETERNUS Web GUI ..................41 Displaying Status via ETERNUS CLI ....................42 Event Notification ......................... 42 Audit Log ............................44 FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...
  • Page 3 Periodic Backup ..........................73 Maintenance Service........................73 Maintenance Support Period..........................73 Replacing Batteries ...............................74 Related Service..............................74 7. Troubleshooting Check List............................75 Required Information for Inquiries....................83 FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...
  • Page 4 OFF Position (Marked "¡") of the PSU Switch of a Power Supply Unit ............35 Figure 39 ETERNUS Web GUI Screen .........................41 Figure 40 Event Notification ............................43 Figure 41 Audit Log..............................44 FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...
  • Page 5 Table 12 General Status of ETERNUS CLI .........................42 Table 13 Volume Formatting Time..........................45 Table 14 Rebuild Process Time..........................46 Table 15 Copyback Process Time..........................46 FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...
  • Page 6 Preface Fujitsu would like to thank you for purchasing the FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 (herein- after referred to as ETERNUS AF). The ETERNUS AF is designed to be connected to Fujitsu servers (Fujitsu SPARC Servers, PRIMEQUEST, or PRIMER- GY) or non-Fujitsu servers.
  • Page 7 Indicates information that you need to observe when using the ETERNUS storage system. Make sure to read the information. Indicates information and suggestions that supplement the descriptions included in this manual. FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...
  • Page 8 - Be careful that no liquid seeps into the ETERNUS storage system when using cleaners, etc. - Do not use alcohol or other solvents to clean the ETERNUS storage system. Warning layout ribbon FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...

  • Page 9: Component Names And Led Names

    This section provides the names of the components on the rear of a controller enclosure. Figure 2 Rear View of a Controller Enclosure Controller (CM#0) Controller (CM#1) Power supply unit (PSU#0) Power supply unit (PSU#1) FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...

  • Page 10: Components (Front)

    The installation location of the ETERNUS AF is identified according (blinks blue) to the instruction that is issued from ETERNUS Web GUI or ETER- NUS CLI. FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...

  • Page 11: Figure 4 Drives

    • (amber) • The LED light up operation was performed from the ETERNUS CLI command line in order to identify the drive location. FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...

  • Page 12: Eternus Af250 S2 Components (Rear)

    DI (OUT) LINK/FAULT LED 10. READY/FAULT LED 11. CA#1 FAULT LED 12. MASTER LED 13. LINK/FAULT LED 14. LAN ACT LED 15. LAN LINK LED FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...

  • Page 13: Table 3 Status And Meanings Of Each Led (Controller)

    Data is being sent or received via the LAN port. (blinks green) LAN LINK The link between the LAN port and the destination has been es- (green) tablished. FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...

  • Page 14: Figure 7 Host Interface For Fc Cable Connection (Installed In A Controller)

    Host interface port (CA#0, Port#0) Host interface port (CA#0, Port#1) Host interface (CA#1) Host interface port (CA#1, Port#0) Host interface port (CA#1, Port#1) FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...

  • Page 15: Figure 9 Host Interface For Copper Twinax Cable Connection (Installed In A Controller)

    Host interface port (CA#0, Port#0) Host interface port (CA#0, Port#1) Host interface (CA#1) Host interface port (CA#1, Port#0) Host interface port (CA#1, Port#1) FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...

  • Page 16: Figure 11 Power Supply Units

    FAN FAIL The power supply unit or the fan in the power supply unit is in er- (amber) ror status. FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...

  • Page 17: Eternus Af250 Components (Rear)

    DI (OUT) LINK/FAULT LED 10. READY/FAULT LED 11. CA#1 FAULT LED 12. MASTER LED 13. LINK/FAULT LED 14. LAN ACT LED 15. LAN LINK LED FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...

  • Page 18: Table 5 Status And Meanings Of Each Led (Controller)

    Data is being sent or received via the LAN port. (blinks green) LAN LINK The link between the LAN port and the destination has been es- (green) tablished. FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...

  • Page 19: Figure 13 Host Interface For Fc Cable Connection (Installed In A Controller)

    Host interface port (CA#0, Port#0) Host interface port (CA#0, Port#1) Host interface (CA#1) Host interface port (CA#1, Port#0) Host interface port (CA#1, Port#1) FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...

  • Page 20: Figure 15 Iscsi 10Gbit/S (10Gbase-T) Interface (Installed In A Controller)

    Host interface port (CA#0, Port#0) Host interface port (CA#0, Port#1) Host interface (CA#1) Host interface port (CA#1, Port#0) Host interface port (CA#1, Port#1) FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...

  • Page 21: Figure 16 Power Supply Unit

    FAN FAIL The power supply unit or the fan in the power supply unit is in er- (amber) ror status. FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...

  • Page 22: Drive Enclosures

    This section provides the names of the components on the rear of a drive enclosure. Figure 18 Rear Views of a Drive Enclosure I/O module (IOM#0) I/O module (IOM#1) Power supply unit (PSU#0) Power supply unit (PSU#1) FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...

  • Page 23: Components (Front)

    ETERNUS Web GUI or ETERNUS CLI. FAULT The drive enclosure is in error status. (amber) POWER DC power is supplied to the drive enclosure. (green) FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...

  • Page 24: Figure 20 Drives

    • (amber) The LED light up operation was performed from the ETERNUS • CLI command line in order to identify the drive location. FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...

  • Page 25: Components (Rear)

    ETERNUS Web GUI or ETER- NUS CLI. FAULT The I/O module is in error status. (amber) FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...

  • Page 26: Figure 23 Power Supply Unit (Drive Enclosure)

    FAN FAIL The power supply unit or the fan in the power supply unit is in er- (amber) ror status. FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...

  • Page 27: Power Distribution Units (For Regions Other Than The Emeia, Central American, And Caribbean Re- Gions)

    Inlet (INPUT) This is a socket (IEC60320 C14) for incoming power supply. This socket is used to connect a power cord (AC input cable). FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...

  • Page 28: Power Distribution Units (2U)

    This is a socket (IEC60320 C13) for outgoing power supply. This socket is used to connect a power cord (AC out- put cable). FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...

  • Page 29: Figure 28 Power Distribution Unit (Ac200-240V, 2U, 16 Outlets)

    This is a socket (IEC60320 C13) for outgoing power supply. This socket is used to connect a power cord (AC out- put cable). FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...

  • Page 30: Basic Operation

    Figure 29 ON Position (Marked "|") of the Main Line Switches on a 1U Power Distribution Unit Main line switch Figure 30 ON Position of the Main Line Switches on a 1U Power Distribution Unit Main line switch FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...

  • Page 31: Figure 31 On Position (Marked "|") Of The Main Line Switches On A 2U Power Distribution Unit

    37), turn all the PSU switches of the power supply unit to the OFF posi- tion, and turn the main line switch to the OFF position. FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED...

  • Page 32: Figure 33 Off Position (Marked "¡") Of The Main Line Switches On A 1U Power Distribution Unit

    Figure 33 OFF Position (Marked "¡") of the Main Line Switches on a 1U Power Distribution Unit Main line switch Figure 34 OFF Position of the Main Line Switches on a 1U Power Distribution Unit Main line switch FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...

  • Page 33: Figure 35 Off Position (Marked "¡") Of The Main Line Switches On A 2U Power Distribution Unit

    When turning the main line switch to ON (marked "|") right after turning the main line switch to OFF (marked "¡"), turn it back to ON (marked "|") after the POWER LED of the power supply unit has turned off completely. FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED...

  • Page 34: Switching On And Off The Psu Switch On The Power Supply Unit

    For the drive enclosure, the POWER LED on the power supply unit emits green lights and the fan revolves at • high speed for 30 seconds. Drive enclosure Controller enclosure Power supply unit (PSU#0) Power supply unit (PSU#1) POWER LED FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...

  • Page 35: Figure 38 Off Position (Marked "¡") Of The Psu Switch Of A Power Supply Unit

    Figure 38 OFF Position (Marked "¡") of the PSU Switch of a Power Supply Unit Power supply unit (PSU#0) Power supply unit (PSU#1) Check that the POWER LED of the power supply unit is off. FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...

  • Page 36: Powering On

    (max.) longer to reach the READY state the next time the ETERNUS AF is turned on. If the ETERNUS AF250 S2 is not connected to a power source for long periods, it takes up to four hours be- •...

  • Page 37: Powering Off

    The following methods can be used to turn off the power by linking with the server. Via the power synchronized unit • Use the power synchronized unit to turn off the ETERNUS AF. FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...
  • Page 38 When a power synchronized unit is connected, the power of the ETERNUS AF is auto- matically turned on because the power synchronization function is activated. To turn off the ETERNUS AF250 S2, use the Power switch, a power synchronized unit, ETERNUS Web GUI, or •...

  • Page 39: Using The Function Button

    FUNCTION button is operated. The following procedure explains how to use the FUNCTION button. Remove the flange cover of the ETERNUS AF. FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...
  • Page 40 Use the pin to push down the FUNCTION button for three seconds. The MAINTENANCE LED turns off, which indicates that the ETERNUS AF is no longer in maintenance status. Attach the flange cover. FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...

  • Page 41: Storage System Monitoring

    An abnormality is detected at a power-off, and I/O access from the server cannot be received. (red) The ETERNUS AF is in error state. (red) FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...

  • Page 42: Displaying Status Via Eternus Cli

    The methods that can be used to notify an event are "e-mail", "SNMP Trap", "Syslog", "remote support", and "host sense". For the procedure on setting event notification, refer to "Configuration Guide (Basic)". FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...

  • Page 43: Figure 40 Event Notification

    Figure 40 Event Notification Mail server SNMP manager Syslog server Syslog E-mail SNMP Trap Host sense Remote Server (host) support center REMCS/AIS Connect ETERNUS AF FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...

  • Page 44: Audit Log

    Figure 41 Audit Log Device name Login User/role Process time Setting change Process details Process result Logout etc. Audit log System administrator Syslog server ETERNUS AF FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...

  • Page 45: Process Time (Estimated)

    *1: The value shows the time required for volume formatting when the volume capacity is 200GB and there is no server I/O. The time that is required depends on the type and configuration of the drive. FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED...

  • Page 46: Rebuild/Copyback Process Time

    Note that RAID group performance (throughput) may be reduced when a rebuild, copyback, or redundant copy is being performed in the target RAID group. FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED...

  • Page 47: Component Expansion/Function Enhancement

    Contact your sales representative or maintenance engineer if drives that are installed by default need to be uninstalled or moved to another slot. Installable Drives For installable drives, refer to "Product List". FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...

  • Page 48: Drive Handling Instructions

    Failure to discharge static electricity may cause failure in the ETERNUS AF. Leave the drive in its package until ready to install it. • FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...

  • Page 49: Additional Drive Installation Procedure

    ETERNUS AF are in normal status. Wear a wrist strap or touch a metal part to discharge the human body's natural static electricity. FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...
  • Page 50 Insert the drive all the way into the slot, making sure that it is firmly seated and that the lock lever is still left open. FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED...

  • Page 51: Installing Additional Drive Enclosures

    Drive enclosures can be installed while the ETERNUS AF is running without affecting the system. This section explains how to install drive enclosures in the ETERNUS AF. FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED...

  • Page 52: Installable Drive Enclosures

    When handling drive enclosures, wear a wrist strap or touch a metal part to discharge • the human body's natural static electricity. Failure to discharge static electricity may cause failure in the ETERNUS AF. FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...

  • Page 53: Additional Drive Enclosure Installation Procedure

    To disconnect the mini SAS HD cables between enclosures, hold the tab and then pull out the connector. FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED...
  • Page 54 "Target Drive Enclosure", and then click the [Next>>] button. Type • Select the type of drive enclosure that is to be added. 2.5" 24DE 2.5" type drive enclosure FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...
  • Page 55 Use the two plates to fasten the rack rails to the front rack pillars. Use the washers to fasten the rack rails to the rear rack pillars. FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED...
  • Page 56 Failure to do so may cause injury. FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED...
  • Page 57 Check the connection destination of the mini SAS HD cables between enclosures. The connectors on the cable with the "l" symbol are connected to the DI (IN) ports on the added drive • enclosure. FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...
  • Page 58 Wrap the release tie around the power cord and fasten the release tie from either side. Make sure that the release tie is not loose. FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED...
  • Page 59 Configuration of IOM#0 in the drive enclosure that is to be added and the power supply units in the system is performed. Click the [Next >>] button. The [Connect Cable] screen appears. FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...
  • Page 60 Connect here Controller 1 Controller enclosure Click the [Next >>] button. A screen that indicates the drive enclosure has been added appears. FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...

  • Page 61: License Registration

    An Advanced Copy Feature license must be enabled to use Veeam Storage Integration. • For the procedure to obtain the Veeam Storage Integration license, refer to "Configuration Guide (Basic)". FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...
  • Page 62 Click [Register Veeam License] in [Action]. The [Register Veeam Storage Integration License] screen appears. Enter the license key and click the [Register] button. A confirmation screen appears. FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...

  • Page 63: Installing Long Wave Sfp+ Modules (16Gbit/S)

    One or two Short wave SFP+ modules (16Gbit/s) in a host interface (FC 16Gbit/s) can be replaced with Long wave SFP+ modules (16Gbit/s). FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...

  • Page 64: Installable Long Wave Sfp+ Modules (16Gbit/S)

    Do not place any objects on top of SFP+ modules. • • Do not knock or drop SFP+ modules on hard objects. FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...

  • Page 65: Long Wave Sfp+ Modules (16Gbit/S) Installation Procedure

    Pull the Short wave SFP+ module (16Gbit/s) straight out of the port cage. Make sure to store the removed Short wave SFP+ module (16Gbit/s) with the fixing lever and the con- nector cover attached. FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...
  • Page 66 FC port status is Normal and the SFP type is changed to "16G SFP+(SMF)". In addition, confirm that all of the other components are in normal status. FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED...

  • Page 67: Adding Servers

    The RAID group is registered and the registration completion screen appears. Click the [Done] button. The screen returns to the [RAID Group] screen. FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...

  • Page 68: Volume Creation

    The procedure to create a host affinity is as follows: Host group addition • CA port parameter settings • CA port group creation • • LUN group addition Host affinity creation • FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...
  • Page 69 When any server is already connected, make sure that the server will not be affected by the change. For details on how to change the settings, refer to "Configuration Guide (Web GUI)". FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED...
  • Page 70 Click the [Connectivity] tab on the navigation of the ETERNUS Web GUI screen, and then click "LUN Group" in [Category]. The [LUN Group] screen appears. In [Action], click [Add LUN Group]. The [Add LUN Group] screen appears. FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...
  • Page 71 Select a host group that is to be associated, and click the [OK] button. When "All" is selected • Select a host response, and then click the [OK] button. FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...
  • Page 72 Click the [OK] button. The host affinity is created and the registration completion screen appears. Click the [Done] button. The screen returns to the [Connectivity] screen. FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...

  • Page 73: Maintenance

    The standard maintenance support period for ETERNUS AF is five years from the date of purchase, or is defined in your service level agreement (SLA). Contact your sales representative for details if you prefer to extend the peri- FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED...

  • Page 74: Replacing Batteries

    Maintenance Service Replacing Batteries The batteries of the ETERNUS AF250 S2 are expendable components that need to be replaced periodically. Batteries can be replaced during regular maintenance free of charge. For customers without a maintenance con- tract, replacement requests (payment required) must be made.

  • Page 75: Troubleshooting

    Is the main line switch of the power distribution unit turned OFF (¡)? • Is there a power failure? • • Is the mini SAS HD cable between enclosures disconnected? FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...
  • Page 76 Press the controller enclosure's Power switch for four seconds or more to turn off the ETERNUS AF, and turn off the AC power. Reconnect the mini SAS HD cable between enclosures. FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...
  • Page 77 Protection (Shield) function works and how to check whether it is running, refer to "Design Guide (Basic)". If the problem persists, contact your maintenance engineer. FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...
  • Page 78 Note that the settings (network environment settings and firewall settings) for all of the LAN ports are initial- ized after the following procedure is performed. Remove the flange cover of the ETERNUS AF. FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...
  • Page 79 AF does not respond to SNMP access. Check whether each service can connect to the ETERNUS AF. If it cannot connect, contact your maintenance engineer. FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...
  • Page 80 When I/O Access Is Slow Check the points that are shown below. When the cause is not identified, contact your maintenance engineer. Check the battery status of the ETERNUS AF250 S2 by using ETERNUS Web GUI. If the battery charge rate is low •...
  • Page 81 When a switch is used, the WWN zoning settings need to be changed. For details on this setting, refer to relevant manuals of the switch. After completing the settings, confirm that access from the server is available. FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AG-1842-06ENZ0...
  • Page 82 For details on the replacement procedure, refer to the relevant documentation for the LAN card. After completing the settings, confirm that access from the server is available. FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED...

  • Page 83: Required Information For Inquiries

    ETERNUS Web GUI. For details on obtaining the log/dump information, refer to "ETERNUS Web GUI User's Guide". FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic) Copyright 2019 FUJITSU LIMITED...
  • Page 84 However, Fujitsu shall assume no responsibility for any operational problems as the result of errors, omissions, or the use of information in this manual. Fujitsu assumes no liability for damages to third party copyrights or other rights arising from the use of any information •...

This manual is also suitable for:

Eternus af250

Table of Contents