Control And Monitoring - Fujitsu IRF-1S series User Manual

Chapter 1 - Getting Started

Control and Monitoring

An integral part of the imageRAID Series Storage System is its control and monitor
capabilities.
The SES processors provide monitoring data for the enclosure environmental
conditions such as enclosure temperature, cooling fans, power supplies, and FC
Loop status. This data is reported to the monitoring system to provide LED and
audible alarm notifications. This monitored information is also communicated to
external monitoring software.
Refer to "VT-100 Interface Enclosure Monitoring" on page 116 for complete
details.
Drive Status LEDs
(left column of LEDs)
Drive Activity LEDs
(right column of LEDs)
Power On LED
Channel Status LED
Power Supply Status LED
Fan Status LED
Alarm Reset Button
Front Bezel LEDs and Reset Button Identification
The imageRAID Controllers provide monitoring data for its environmental
condition and logical arrays. They communicate that data to the front bezel LEDs,
third-party configuration and monitoring software such as StorView, and the
VT-100 firmware-based interface for management and monitoring. (Refer to the
software user's guide for configuration, management, and monitoring of the
controllers and logical arrays.)
18
Control and Monitoring