Fujitsu IRF-1S series User Manual page 97

Power Power
Supply Supply
imageRAID IRF-2Sxx-xx/IRF-2Dxx-xx
Power Power
Supply Supply
imageRAID IRF-JBOD
Multi-Port Mirrored Single Host-Dual Connection Cabling Diagram (Daisy-Chain)
CAUTION: When using dual loop topologies, you will be required to install
and use volume management software.
12 Repeat steps 8 through 11 for each additional daisy-chained enclosure.
13 Power on your system, refer to "Powering On the Storage System" on
page 107.
This completes the setup and cabling of this configuration.
FC HBA 2
Host Computer
Connect to H1
DISK I/O
P1 P2
Cooling
DISK I/O
P1 P2
Fans
SES
RS-232
Connect to P1
Accesses Loop 0, Drive Slots 1-12
DISK I/O
P1 P2
Cooling
DISK I/O
Fans P1 P2
SES
RS-232
Multi-Port Mirrored Single Host-Dual Connection Configuration
Chapter 3 - Setup and Installation
FC HBA 1
Connect to H0
H0 H1 H0 H1
RAID Controller
RAID Controller
Connect to P1
Accesses Loop 1, Drive Slots 1-12
85