Fujitsu IRF-1S series User Manual page 25

Ejector Release Lever
Ejector Release Lever
NOTE: Refer to the Installation chapter for transceiver installation procedures.
Dust covers are provided to protect the transceivers' optics. It is highly recommend
that the dust covers be installed when a connector is not in place.
Installing and Removing Optical Transceiver Dust Covers
Ejector Release Tab
SFP Optical Transceiver Models
Install the Dust Covers
when the optical transceiver
port is not in use.
Chapter 1 - Getting Started
SFP Transceiver
13