Table of Contents
Advertisement
6
Secure the controller by tightening the captive fastener screw. Do not
overtighten the screw.
7
Power-on the enclosure. Refer to "Powering On the Storage System" on
page 107.
NOTE:
(Dual Active Mode) The replacement controller will communicate
with the disk drives and operating controller, and automatically
configure its parameters to match its partner controller.
NOTE:
Dual-Active controllers require the same version firmware and the
same size/type memory on both controllers.
8
Using the packaging materials from the replacement controller, repackage the
failed controller and return it per your RMA instructions.
Chapter 6 - Maintenance
Replacing a RAID Controller
149
Advertisement
Table of Contents
