Table of Contents
Advertisement
Using Handset Features
Manually Selecting a Line or Programmed Button
When you are placing or answering a call, the MDW 9040 automatically selects the line for you. In some
situations, however, you may want to select a particular line (for example, to use an "800" line).
For information about assigning features to buttons, see
MDW 9040 Wireless Pocket Phone Installation and Use, 503-801-190
Programming & Using the MDW 9040 Pocket Phone
To select a particular line or programmable/intercom/drop button, use the following
procedure:
Press
.
1
The
icon displays steadily, and you are connected to an available line.
If the Selection arrow does not appear to the right of the row that includes the line
2
or button you want to use, press the Select-Row (
until the arrow is to the right of that row. (See
Column
Buttons" earlier in this chapter for more information.)
Column Selection pointer
5
1
A
Press the Softkey (
3
select.
You are connected to the line or you have access to the button you chose.
4
To deselect the line or button, press
"The Select-Row Button and the
Select-Row arrow
6
7
2
3
B
C
button below the line or button triangle that you want to
)
.
Chapter
6,
"MDW 9040 Pocket Phone
button one or more times
)
8
4
D
Compatibility."
Issue 2, February 2001
5
67
Advertisement
Table of Contents
