Avaya TransTalk MDW 9040 Installation And Use Manual page 73

Avaya wireless pocket phone installation and use
Hide thumbs Also See for TransTalk MDW 9040:
Table of Contents

Advertisement

Setting or Changing Handset Settings
*Edge-of-Usable-Range Test
*At High Power—Power Level = 8
MDW 9040 Wireless Pocket Phone Installation and Use, 503-801-190
Programming & Using the MDW 9040 Pocket Phone
Edge of Range Test
Note:
To guarantee proper site coverage during this test, walk with the handset
antenna down.
After performing the close up test, periodically check the signal strength and
1
voice quality as you walk away from the radio module.
Note:
Each time you press the Softkey (
readings will display.
If you press the Softkey (
display every three seconds. The automatic condition will continue until
either the Manual Softkey button is pressed, or you exit Wireless Test
Mode.
When you see a signal strength of 3 and a voice quality level of 7 or 8 for both
2
handset (H) and base (B), and the power level shows H=8 and B=8, the voice
quality should be satisfactory. This is the edge of your usable range.
Note:
The distance will vary depending on the environment, building structure,
and other factors. The range in an average office building is 500 to 900
feet (152.5 to 274.5 m). If, however, dense walls intervene, the distance
could be less.
Figure 24. Close Up and Edge of Usable Range Test
Close-Up Test
5 to 10 feet (1.5 to 3.1 m)
Signal Strength = 9 to 10
Voice Quality = 9 to 10
Signal Strength = 3
Voice Quality = 7 to 8
) below Man, new manual
) below Auto, automatic test readings will
Dual Radio
Module
Issue 2, February 2001
5
65

Advertisement

Table of Contents
loading

This manual is also suitable for:

Transtalk 9000Ip office transtalk mdw 9040

Table of Contents