Table of Contents
Advertisement
Setting or Changing Handset Settings
Responding to the Last
Line on the Screen
MDW 9040 Wireless Pocket Phone Installation and Use, 503-801-190
Programming & Using the MDW 9040 Pocket Phone
For example, to select an option on the handset display:
1
Press
to enter Menu Mode.
Menu
The display shows the initial Menu screen.
Options
Configuration
Test Mode
Sel
Press the Select-Row (
2
row on which the selected option is located. For example, press
arrow is placed to the right of Options as in the example above.
Press the Softkey (
3
On the bottom row of the screen, you may see Sel, More, or Exit/Back such as in the
following example:
OPTIONS MENU
Ringer
Vibrator
Sel
These options indicate:
Sel(ect) — you can select the currently highlighted option such as Ringer or
•
Vibrator by pressing the Softkey (
•
More — there are more options than shown on the current screen. To see the next
screen of options, press the Softkey (
•
Back— available on many screens, this option allows you to go back to the
previous screen.
•
Exit — available on the initial Menu screen, this option allows you to exit Menu
Mode. When in Menu Mode, you can also exit by pressing the Menu button.
Exit
) button until the arrow is placed to the right of the
) below Sel (for Select).
More
Back
) below Sel.
) below More.
5
until the
51
Issue 2, February 2001
Advertisement
Table of Contents
