Table of Contents
Advertisement
Setting Up and Registering the Handset Registering the Pocket Phone to a Dual Radio Module
A Quick Reference Procedure for Handset Registration
Refer to the main features on the radio module in
on page 9
as you complete the procedural steps listed below.
STEP 1: Use the Station Line Cord provided to connect the radio module Line jack (either
Line 1 or Line 2) to the desired station port.
STEP 2: Attach a charged battery to the handset.
STEP 3: Use the handset Menu and the double-arrow Select-Row buttons under the
CONFIGURATION option to select the REGISTRATION screen.
STEP 4: Press the Handset Registration activation button on the Dual Radio Module
corresponding to the Line (1 or 2) to which the handset will be registered. The
corresponding radio module LED will flash to indicate that the radio module is ready for
handset registration.
STEP 5: Press the Softkey
registration process. The handset display should indicate a successful completion and the
radio module LED should stop flashing.
NOTE: For dual zone operation, register the first handset to Zone 1. Then, repeat the
registration process, moving the arrow to Zone 2 to register the handset with the other radio
module to which it will be associated for dual zone operation.
The following occurs:
~
The second radio module makes checks regarding the handset registration request.
~
If there are no unexpected conditions, the associated base module and handset communicate using
special link-up signaling.
The handset displays a "Registration Completed" message to the user.
~
MDW 9040 Wireless Pocket Phone Installation and Use, 503-801-190
below Reg on the handset display to complete the
(
)
REGISTRATION:
Z1 Registered
Zone 2
Reg
Un-Reg
Figure
3:
"The Dual Radio Module"
Ä
Back
39
Issue 2, February 2001
Advertisement
Table of Contents
