Avaya TransTalk MDW 9040 Installation And Use Manual page 65

Setting or Changing Handset Settings
Turning on the Line
Pre-Select Option
MDW 9040 Wireless Pocket Phone Installation and Use, 503-801-190
Programming & Using the MDW 9040 Pocket Phone
Line Pre-Select lets you choose the line or button you want to use before turning the
handset on. For example, suppose your phone is ringing, but you want to pick up a
call that is holding on another line instead of the ringing call. In normal operation, the
communications system automatically connects you to the ringing line as soon as you
turn on the handset. With Line Pre-Select enabled, you can select the line you want to
connect to before turning on the handset.
The Line Pre-Select option can be turned ON or turned OFF.
Note: When Line Pre-Select is enabled, you do not have to use it; however you
cannot use it unless it is enabled.
To enable Line Pre-Select:
1 From the initial Options Menu screen, press the Softkey (
Additional Options Menu options display.
Press the Select-Row (
2
Press the Softkey (
3
The Pre-Select Control screen displays.
Note: The currently active option, if any, flashes (indicated by **).
4 Press the Select-Row (
When you have moved the Select-Row arrow to the appropriate option, press the
5
Softkey ( ) below Sel.
OPTIONS MENU
Ä
Backlighting
Pre-Select
Sel More Back
) button to move the arrow to Pre-Select.
OPTIONS MENU
Backlighting
Ä
Pre-Select
Sel More Back
) below Sel.
PRE-SELECT:
Ä
*On*
Off
Sel Back
) button to move the arrow to the On or Off option.
5
) below More.
57
Issue 2, February 2001