Table of Contents
Advertisement
6
MDW 9040 Pocket Phone Compatibility
For this release...
All versions that support
PARTNER Circuit Packs
R1.5, R2
All versions that support 2-
wire DCP
Legend: R = Release, FP = Feature Package, FM = Feature Module, G = Generic
Note:
The MDW 9040 Pocket Phone is fully compatible with the PARTNER family of
communications systems. For the remaining communications systems, however, you must
carefully note the functional differences between your wireless phone and the phone type
identified in the previous table. Differences are summarized on the following pages.
Some systems do not support display features. In these cases, the display is not available; the
MDW 9040 Pocket Phone works as a nondisplay set.
Programming Features for PARTNER, MERLIN, MERLIN LEGEND and MERLIN
MAGIX Systems
On all PARTNER, MERLIN, MERLIN LEGEND and MERLIN MAGIX systems, you can assign a feature to an
available button (a button that does not have a line or another feature assigned to it):
74
Issue 2, February 2001
Of this communications
system...
MERLIN MAGIX
MERLIN MAGIX
DEFINITY
DEFINITY PRO LOGIC
To enter programming mode, turn on the handset, then press
1
"0 0."
Press the Select-Row (
2
indicators containing the available button.
3
Press the Column (
Program the feature (using the procedure described in the manual for your
4
PARTNER, MERLIN, MERLIN LEGEND, or MERLIN MAGIX
communications systems).
Note:
Some features provide a visual indication in the handset display that the
feature is turned on. Be aware that if you turn off the handset while using
one of these features, you may forget that the feature is on. To verify the
status of a such a feature, you can simply press the
up" the phone and activate the display.
To exit programming mode, press
5
For MERLIN LEGEND and MERLIN MAGIX, press
turn off the handset.
Note:
The above instructions do not apply to DEFINITY systems, because in
those systems, features are assigned by the System Administrator.
MDW 9040 Wireless Pocket Phone Installation and Use, 503-801-190
Programming and Call Handling Instructions
used with this Dual
Radio Module Type
3204-DRE
3204-DRD
3204-DRD
3204-DRD
) button to move the arrow to the row of line
) button under the button that you want.
followed by 00 or turn off the handset.
Feat/P
Use the instructions for
a...
18D phone
(Apparatus code 7311H)
12- or 24-button 4400 Series
phone
(Apparatus code 7317H)
8410D
8410D
2 of 2
followed by
Feat/P
button to "wake
followed by *00 or
Feat/P
Advertisement
Table of Contents
